Logging 基本用法
在此教程中,我们将学习发出日志消息和日志事件的基本用法。我们也会学习一点关于每条 log 消息由哪些信息组成以及当 log 消息发出后发生了什么。如果你要写一个脚本或者包,此章节应该覆盖了你需要的所有信息。
跟随教程把代码片段复制粘贴到 Julia REPL 中执行,是个不错的注意!
基本日志事件
log 事件中大部分重要的信息是日志消息和日志级别。日志消息通常是一个信息量很大的文本字符串,日志级别是个严重性级别,用来向读者说明 log 消息的重要性。Julia的 Base
模块默认是可用的,它提供了日志宏 @ingo
, @warn
, @error
,和 @debug
来创建日志消息。它们对应到常见的日志级别:
- Info: 有用的信息但是一点也不严重
- Warning: 一些某事可能不正确的信息
- Error: 某事发生了错误的信息
- Debug: 在调试时很有用的附加信息
让我们看看如何使用上面提到的宏创建一些日志消息:
julia> @info "This is an info message, carry on as usual."
[ Info: This is an info message, carry on as usual.
julia> @warn "This is a warning message, something might be wrong?"
┌ Warning: This is a warning message, something might be wrong?
└ @ Main REPL[2]:1
julia> @error "This is an error message, something is not working as it should!"
┌ Error: This is an error message, something is not working as it should!
└ @ Main REPL[3]:1
julia> @debug "This is a debug message, it is invisible!"
julia>
正如你看到的,简单的用法只需要宏,它确定了日志级别和消息字符串。默认的日志后端负责处理我们生成的日志消息,像上面示例展示的一样打印已格式化,色彩化的消息到终端。格式默认是由日志级别决定的: @info
消息不输出像 @warn
和 @error
一样的位置信息(模块,文件,行号)。你也可以注意到 @debug
消息默认情况下是关闭的。通常在你调试代码中的问题需要更多信息时,才需要开启它们。
向日志事件添加额外元数据
在上述示例中,我们传给日志宏的唯一信息是日志消息字符串。可以通过在消息字符串后面附加额外事物来传递更多信息。额外信息可以使用 key = value
语法添加:
julia> @info "hello, world" x = [1, 2, 3] y = "something else"
┌ Info: hello, world
│ x =
│ 3-element Vector{Int64}:
│ 1
│ 2
│ 3
└ y = "something else"
或者仅附加一个变量:
julia> x = [3, 4, 5];
julia> @info "hello, world" x
┌ Info: hello, world
│ x =
│ 3-element Vector{Int64}:
│ 3
│ 4
└ 5
在这两个示例中,你可以看打日志后端很好的格式化了日志消息字符串后面的额外信息。添加额外信息在一些情况下是很有用的,特别是如果你想保持消息字符串不变,只传递一些动态信息。
日志级别
四个日志级别 Info
, Warn
, Error
, 和 Debug
只是特定数字级别的别名,允许的日志级别范围正如你在下表看到的:
Level | Alias | Comment |
---|---|---|
-1000001 | Logging.BelowMinLevel | (below) lowest possible level |
-1000 | Logging.Debug | log level for @debug messages |
0 | Logging.Info | log level for @info messages |
1000 | Logging.Warn | log level for @warn messages |
2000 | Logging.Error | log level for @error messages |
1000001 | Logging.AboveMaxLevel | (above) highest possible level |
Logging 模块是 Julia 自带的,提供了 @logmsg
宏,它是目前为止提到的其他宏的泛化。使用此宏时除了消息字符串,它还要求传递一个日志级别,但除此之外,@logmsg
的工作原理是一样的,这是一些示例:
julia> using Logging
julia> @logmsg Logging.Info "Info message from @logmsg."
[ Info: Info message from @logmsg.
julia> @logmsg Logging.Error "Error message from @logmsg." x = [1, 2, 3]
┌ Error: Error message from @logmsg.
│ x =
│ 3-element Vector{Int64}:
│ 1
│ 2
│ 3
└ @ Main REPL[3]:1
@logmsg
宏也可以使用 LogLevel
构造函数创建任何级别的日志消息:
julia> @logmsg Logging.LogLevel(123) "Log message with log level 123."
[ LogLevel(123): Log message with log level 123.
julia> @logmsg Logging.LogLevel(1234) "Log message with log level 1234."
┌ LogLevel(1234): Log message with log level 1234.
└ @ Main REPL[2]:1
julia> @logmsg Logging.LogLevel(2345) "Log message with log level 2345."
┌ LogLevel(2345): Log message with log level 2345.
└ @ Main REPL[3]:1
从彩色输出我们可以推断出日志级别 123 是一个 info
消息,日志级别 1234 是一个 Warn
消息,日志级别 2345 是一个 Error
消息。你也可以在上表的帮助下看到这些:一个具有等级 X
的日志消息是一个:
- debug message if
Logging.Debug <= X < Logging.Info
, - info message if
Logging.Info <= X < Logging.Warn
, - warn message if
Logging.Warn <= X < Logging.Error
, - error message if
Logging.Error <= X < Logging.AboveMaxLevel
.
像这样自定义的日志级别不常见,但是有时它很方便,并且具有一些更细粒度的控制。
位置元数据
在上面的日志输出中你看到一些其他元数据附加到消息。特别是,日志事件的来源模块,文件名和行号被打印。因为代码是在 Julia REPL 中运行的,模块是 Main
,文件是 REPL[..]
,行号为 1
。每个上面提到的宏生成的日志事件都和以下元数据关联:
- 来源模块,
- 来源文件,
- 来源行号,
- 一个日志事件 id(位置独有的),
- 一个日志事件组(默认为文件名)。
由日志后端选择如何处理此信息。例如,Julia REPL 中默认的记录器后端对于 @info
消息不显式元数据,对于其他消息仅显式模块,文件,和行号。也可以覆盖默认设置,例如改变来源位置。你需要传递关键字参数到日志消息宏来做到:
julia> @warn "Overriding the source module" _module = Base
┌ Warning: Overriding the source module
└ @ Base REPL[1]:1
julia> @warn "Overriding the source file" _file = "example.jl"
┌ Warning: Overriding the source file
└ @ Main example.jl:1
julia> @warn "Overriding the source line" _line = 123
┌ Warning: Overriding the source line
└ @ Main REPL[3]:123
julia> @warn "Overriding the log event group" _group = :example
┌ Warning: Overriding the log event group
└ @ Main REPL[4]:1
julia> @warn "Overriding the log event id" _id = :id
┌ Warning: Overriding the log event id
└ @ Main REPL[5]:1
因此默认的记录器后端仅显式模块,文件,和行号,其他的覆盖是不可见的。